Let me make you a special display for your favorite gun – or anything else. Every board is unique and cannot be duplicated. Options are dependent on material I have available or material I can readily obtain.
If you are not in the Central Texas area, I recommend a kit for you to assemble. This is because it is nearly impossible for me to know exactly where on the board to install the gun rests if I don’t have your gun. In most cases the left rest will be mounted lower than the right rest. There are some cases where I do have the gun and can help you out. I do not provide wall mounts because the board needs to be mounted into studs and I have no idea where the studs would be located behind the board unless you are able to explain it to me. I can give it my best shot in both cases if you provide the measurements.
Just select an available board below for shipping. Let me know what kind of rests you would like and I will ship them as well. When you receive the board and rests, follow the directions for installing your rests. It requires laying out your gun and rests on the board, drilling a few holes and installing the rests with screws or antique nails. Installation of the board on the wall will be a similar process. Contact me for more details.
Boards can be customized by epoxy inlaying bullets, etc. Contact me for details. A 50% non-refundable deposit may be required on custom build projects.
AVAILABLE BOARDS
59BEL The spalted box elder board above measures just under 59″ long, 12″ to 14″ wide and just over 3/4″ thick. This box elder is stunning with the tan, gray and reds. the photos don’t do it justice. Box Elder is much lighter in color and weight when compared to mesquite. $225
57BEL The spalted box elder board above measures just under 57 1/2″ long, 16 1/2″ wide and just over 3/4″ thick. This box elder is stunning with the tan, gray and reds. the photos don’t do it justice. Room for two. Box Elder is much lighter in color and weight when compared to mesquite. $225
57MES The above mesquite board measures 57″ long. about 11″ wide and an inch thick. The natural cracks on this board were filled with blue epoxy. Nice clean looking board. $175
52BEL The spalted box elder board above measures just under 59″ long, 15″ to 16″ wide and just over 3/4″ thick. This box elder is stunning with the tan, gray and reds. the photos don’t do it justice. Box Elder is much lighter in color and weight when compared to mesquite. $225
52MES The above mesquite board is very large and has room for two. About 52″ x up to 21″ x 1″, There is a lot of different stuff going on with this board as you examine it. It is rare for me to have a board this large. $225
51MES The mesquite board above measures 51.5″ long, around 11″ wide and 1″ thick. It has a great shape for displaying a firearm. This is a rustic board with some tunnels through the edges from a former resident, the longhorned beetle. $175
#47OAK The above board is a solid piece of oak burl. Very nice grain and unusual piece with lots of bark inclusions. Big enough for two firearms and more at 47″ long, 23″ wide and 3/4″ thick. The light color really makes allows the firearms to display nicely. Te dark line is a stain from a nail that was in the tree. SALE $125
52BEL The box elder board above measures 45.5″ long, 15″ wide at the widest, and just over 3/4″ thick. This box elder is an off white with a couple splashes of red. It really makes the rifle pop. Box Elder is much lighter in color and weight when compared to mesquite. $125
48MES The above mesquite board measures 48″ long, and about 12″ wide, 1″ thick. Cracks were filled with epoxy. I would describe it as a clean board with accents of character. $135
44MES The above mesquite board measures about 44″ long, 10″ wide and 1″ thick. It has been fractal burned . $115
44BEL The spalted box elder board above measures 44.5″ long, 11″ to 13.5″ wide and just over 3/4″ thick. This box elder is stunning with the tan, gray and reds. the photos don’t do it justice. Box Elder is much lighter in color and weight when compared to mesquite. $195
44CE The above cedar elm board measures about 44″ long, up to 14″ wide and 1″ thick. The light color of this board will make anything you display on it stand out. It still has much of the bark attached. $95
43CED The above cedar board measures 42.75″ long, 11,5″ – 14″ wide and .75″ thick. A nice simple, clean looking board. $95
29CE The above cedar elm board measures 29′ long, 10″ to 18″ wide and 1″ thick. $85
28CEDELM The above cedar elm board measures 28″ long, 10″ to 18″ wide and 1″ thick. This slab came from a tree in my yard, Beautiful display piece for many things with bark on. I also made the Bowie knife. $85 Knife and pistol not included.
28MES The above mesquite board measures 28″ long, 10″ to 18″ wide and 1″ thick. It is a beautiful dark wood. $85
I also make knives and swords. The damascus bowie knife above is one of my pieces. Knife and pistol not included with board.
GUN RESTS
Hand Forged Gun Rests The above hooks can be used for many things including gun rests for my boards. $35 a pair.
Vintage hand forged nails $5/pair
Horseshoe Gun Rests with Railroad Spike and felt lining $30/ pair
SOLD BOARDS
I made the knives, board and rests on the above board.
Cherry with fractal images burned into the wood.
This mesquite Tennessee board was inlayed with spent bullets at the locations of major cities.
This layout photo was taken prior to inlaying the bullets and finishing the wood.
Bullet inlays can be added at a cost of $15 each.
Customer provided photo. One inch thick mesquite slab with tung oil finish. Customer did a great job mounting the board to the wall and firearm rests to the board. The board alone weighs over 30 lbs.
Here is a customer provided photo. The customer purchased a mesquite board, mounted his own brass supports and fastened the board to the wall. Nice job!!!
This display is made with rustic mesquite and antique hand forged nails. It is finished with Danish Oil.
